Academic Positions

  • Present 2014

    Professor

    Walchand College of Engineering Sangli ,Mechanical Engineering

  • 2014 2009

    Associate Professor

    Walchand College of Engineering Sangli ,Mechanical Engineering

  • 2009 1997

    Lecturer

    Walchand College of Engineering Sangli ,Mechanical Engineering

Education & Training

  • Ph.D. 2008

    Ph.D. in Mechanical Engineering

    Indian Institute of Technology, Bombay

  • M.Tech. 2002

    Mechanical Engineering

    Indian Institute of Technology, Bombay

  • B.E. 1994

    Mechanical Engineering

    Walchand College of Engineering, Sangli

Honors, Awards and Grants

  • 2002
    FAST –TRACK Young Scientists Award
    image
  • 2008
    Reviewer of peer reviewed journals
    image
    Reviewer of peer reviewed International Journal of Mechanical Journals “Machining Science and Technology”
  • 2010
    Reviewer of NUiCONE
    image
    Reviewer of NUiCONE 2010 (December 9-11, 2011, International conference organised by Nirma University, Ahmadabad.
  • 2014
    Reviewer of 4th International Conference on Key Engineering Materials
    image
    Reviewer, 4th International Conference on Key Engineering Materials (ICKEM 2014), 22-23rd March 2014, Bali, Indonesia

My Research Students

Mr. Sunil J.Raykar

Mechanical Engineering

View Profile

Mr. Sunil S.Karidkar

Mechanical Engineering

View Profile

Mr. Mahesh R.Jadhav

Mechanical Engineering

View Profile

Mr. Amar S.Bhandare

Mechanical Engineering

View Profile

Mr. Vinod V.Vanmore

Mechanical Engineering

View Profile

Mr.Nikhil J.Padate

Mechanical Engineering

View Profile

Mr. Abhijeet R.Shinge

Mechanical Engineering

View Profile

Good to work with them!

Research Projects

  • image

    Short Title

    Long title

    Add details of project here limited to maximum 300 words

Filter by type:

Sort by year:

Multi-objective Process Optimization to Improve Surface Integrity on Turned Surface of Al/SiCp Metal Matrix Composites Using Grey Relational Analysis

Uday A. Dabade,
Journal Paper Procedia CIRP, 7 (2013), pp299 – 304

Abstract

Casting Defect Analysis using Design of Experiments (DoE) and Computer Aided Casting Simulation Technique

Uday A. Dabade, and R. C. Bhedasgaonkar
Journal Paper Procedia CIRP, 7 (2013), pp 616 – 621

Abstract

Machining of Al/SiCp Metal Matrix Composites at Low Temperature Heating Prior to Machining

Uday A. Dabade, and Suhas Joshi
Journal Paper International Journal of Applied Mechanics and Materials, Trans. Tech Publications, Switzerland, Vol. 197 (2012), pp 2970-2974

Abstract

New Tool Planning and Introduction System for Manufacturing of Engine Components

Uday A. Dabade, and Amrita Mangarulkar
Journal Paper International Journal of Applied Mechanics and Materials, Trans. Tech Publications, Switzerland, Vol. 197 (2012), pp 2080-2084

Abstract

Development of New Prototype Interactive System for Casting Defect Identification and Analysis

Uday A. Dabade, and Harshwardhan Pandit
Journal Paper International Journal of Applied Mechanics and Materials, Trans. Tech Publications, Switzerland, Vol. 197 (2012), pp 3010-3014

Abstract

Cutting Forces and Surface Roughness in Machining Al/SiCp Composites of Varying Composition

Uday A. Dabade, , Harshad Sonwane and Suhas S. Joshi
Journal Paper International Journal of Machining Science and Technology,Vol.14:2 (2011), pp 258-279

Abstract

Some Aspects of Improving Integrity of Machined Surfaces on Al/SiCp Metal Matrix Composites

Uday A. Dabade, and Suhas S. Joshi
Journal Paper Key Engineering Materials,Trans. Tech Publications, Switzerland, Vol. 443 (2010) pp 596-601

Abstract

Modeling of chip–tool interface friction to predict cutting forces in machining of Al/SiCp composites

Uday A. Dabade, , Dilip Dapkekar and Suhas S. Joshi
Journal Paper International Journal of Machine Tools and Manufacture, Vol. 49, Issue 9, July 2009, pp 690-700

Abstract

Analysis of Chip Formation Mechanism in Machining of Al/SiCp Composites

Uday A. Dabade, and Suhas S. Joshi
Journal Paper Journal of Materials Processing Technology, Vol. 209, Issue 10, 1st June 2009, pp. 4704 – 4710

Abstract

Characteristics of Machined Surfaces on Al/SiCp Metal Matrix Composites

Uday A. Dabade, and Suhas S. Joshi
Journal Paper International Journal of Mechanical Engineering and Material Science (IJMEMS), 1 (2) December 2008

Abstract

Modeling of Surface Roughness in Machining of Metal Matrix Composites using ANN

Uday A. Dabade, , Abeesh C. Basheer, Suhas S. Joshi, V.V. Bhanuprasad and V. M. Gadre
Journal Paper Journal of Materials Processing Technology, Vol.197, Issue 1-3, February 2008, pp. 439-444

Abstract

Surface Finish and Integrity of Machined Surfaces on Al/SiCp Composites

Uday A. Dabade, , Suhas S. Joshi, R. Balasubramaniam and V.V. Bhanuprasad
Journal Paper Journal of Materials Processing Technology, Vol. 192-193, 1 Oct. 2007, pp. 439-444

Abstract

Analysis of Surface Roughness and Chip Cross-sectional Area while Machining with Self-propelled Round Insert Milling Cutters

Uday A. Dabade, , S. S. Joshi and N. Ramakrishnan
Journal Paper Journal of Materials Processing Technology, Vol.132, 2003, pp. 305-312

Abstract

Modeling and Development of Self-propelled Rotary Insert Milling Cutter

Uday A. Dabade, , D. M. Pendse, S. S. Joshi and N. Ramakrishnan
Conference Paper Proceedings of the 8th India-Japan Joint Seminar on Manufacturing of Advanced Composites, December 1-6 2002, Mussorie, Uttranchal, (India), pp.63-71

Abstract

Optimization of Electrode Wear Rate (EWR) Quality in EDM Process Using Taguchi Method

Uday A. Dabade, , Nitin S. Banait and Girish D. Karhadkar
Conference Paper Proceedings of 11th International Conference on Productivity and Quality Research (ICPQR) 2005 organized by Indian Institute of Technology, New Delhi (India), 12-15th Dec. 2005

Abstract

Study of Quality Control Policies andMethods: A Review

Uday A. Dabade, , Vikramsinha V. Mane and Nitin Banait
Conference Paper Proceedings of 11th International Conference on Productivity and Quality Research (ICPQR) 2005 organized by Indian Institute of Technology, New Delhi (India), 12-15th Dec. 2005

Abstract

Study of Influence of Process Parameters of Surface Roughness Finish In Ball Burnishing of Aluminium (Al 6351) Alloy

Uday A. Dabade, , Harshad Sonawane, Rahul Nilngekar, Raju Pawade and Nitin Banait
Conference Paper Proceedings of International conference on Advances in Materials Processing and Characterization (AMPC2006) during 28-30 August 2006 organized by Anna University, Chennai, India

Abstract

Evidence of Ductile Tearing Ahead of the Cutting Tool and Modeling the Energy Consumed in Material Separation in Micro-Cutting

Uday A. Dabade, , S. Subbiah, S. N. Melkote, N. Banait, and S. S. Joshi
Conference Paper Proceedings of ASME International Conference on Manufacturing Science and Engineering, 8-11 Oct. 2006 Ypsilanti, MI

Abstract

Surface Finish and Integrity of Machined Surfaces on Al/SiCp Composites

Uday A. Dabade, , Suhas S. Joshi, R. Balasubramaniam and V.V. Bhanuprasad
Conference Paper Proceedings ofThe Seventh Asia Pacific Conference on Materials Processing, 7th APCMP, 2006,organised by National University of Singapore (NUS) and Navyang Technological University, Singapore

Abstract

Some Aspects of Improving Integrity of Machined Surfaces on Al/SiCp Composites

Uday A. Dabade, , Suhas S. Joshi and V.V. Bhanuprasad
Conference Paper Proceedings ofthe Second International Conference on Recent Advances in Composite Materials, ICRACM 2007, Organised by Institute of Technology, Banaras Hindu University, Varanasi, during 20-23rd February 2007 at India Habitat Centre, New Delhi, India

Abstract

Characteristics of Machined Surfaces on Al/SiCp Metal Matrix Composites

Uday A. Dabade, and Suhas S. Joshi
Conference Paper Proceedings of International and INCCOM-6 Conference on Future Trends in Composite Materials and Processing, Organised by IIT Kanpur (India) during 12-14th Dec. 2007

Abstract

Effect of Size of Reinforcement on Machined Surface Roughness of Al/SiCp Composites

Uday A. Dabade, and Suhas S. Joshi
Conference Paper Proceedings of International Conference on Precision, Meso, Micro and Nano-Engineering (COPEN 2007) held at College of Engineering, Trivandrum, India-695016 during 13-14th December 2007

Abstract

Analysis of Chip Formation Mechanism in Machining of Al/SiCp Composites

Uday A.Dabade, and Suhas S. Joshi
Conference Paper Proceedings of Eight Asia-Pacific Conference on Materials Processing, 8th APCMP, 2008, Organised by National University of Singapore (NUS), Navyang Technological University (NTU), Singapore and Guangdong University of Technology, China, during 15–20th June 2008

Abstract

Effect of Abrasive Reinforcement on Work Hardening during Machining of Metal Matrix Composites

Uday A. Dabade, and Suhas S. Joshi
Conference Paper Proceedings of Eight Asia-Pacific Conference on Materials Processing, 8th APCMP, 2008, Organised by National University of Singapore (NUS), Navyang Technological University (NTU), Singapore and Guangdong University of Technology, China, during 15–20th June 2008

Abstract

Some Aspects of Improving Integrity of Machined Surfaces on Al/SiCp Metal Matrix Composites

Uday A. Dabade, and Suhas S. Joshi
Conference Paper accepted for presentation and publication in proceedings of 9th APCMP, 2010, international conference, Organised by The University of New South Wales Sydney, NSW 2052, Australia, during 7th – 10th June 2010

Abstract

Some Study on Die Sinking EDM of Inconel - 718

Uday A. Dabade, and S. P. Nevagi
Conference Paper Proceedings of 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011) S.V. National Institute of Technology, Surat – 395007, India, during June, 6 – 8, 2011

Abstract

Analysis of Machining Process Parameters during Turning of EN 24 Steel

Uday A. Dabade, and S. S. Kamat
Conference Paper Proceedings of 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011) S.V. National Institute of Technology, Surat – 395007, India, during June, 6 – 8, 2011

Abstract

Optimisation: Need of today’s competitive age - A case study on simulation using Auto CAST

Uday A. Dabade, and Harshwardhan C. Pandit
Conference Paper Proceedings of International Conference on Current Trends Technology, ‘NUiCONE – 2011’ Organised by Institute of Technology, Nirma University, Ahmadabad – 382 481, during 8 -10th Dec. 2011

Abstract

Burr removal in drilled holes by EDM process

Uday A. Dabade, and Surendra S. Kurane
Conference Paper Organised by Institute of Technology, Nirma University, Ahmadabad – 382 481, during 8 -10th Dec. 2011

Abstract

A Novel Web-based system for Casting Defect Analysis

Uday A. Dabade, , H.C. Pandit, AmitSata and V. V. Mane
Conference Paper paper published in technical transactions of 60th Indian Foundry Congress, 2 – 4th March 2012, Bangalore, pp 535 – 544

Abstract

Development of Self-Propelled Rotary Insert Milling Cutter

Uday A. Dabade, , S. S. Joshi and N. Ramakrishnan
Conference Paper Proceedings of 20th AIMTDR Conference, held at Birla Institute of Technology, Mesra Ranchi, Zharkhand, (Surendra Kumar, et al. editors), Narosa Publishing House, New Delhi (India), 2002, pp. 55-60

Abstract

Role of Non-Conventional Machining Processes in Micro-Machining: A Review

Uday A. Dabade, , Sandeep Dhanik, S.S. Joshi and N. Ramakrishnan
Conference Paper Proceedings of the Third National Conference on Precision Engineering (COPEN 2003), held at CMTI, Bangalore, India, Dec. 19-20, 2003, pp 157-166

Abstract

Non- Conventional Micromachining Processes and Applications: A Review

Uday A. Dabade, ,Rohit Patil, and Aniruddha Gorambekar
Conference Paper National Conference on State of the Art of Technologies in Mechanical Engineering (NCSAME 2004), organized by JNTU, Hyderabad, 29-30th June 2004

Abstract

Laser Beam Micromachining Process and Applications: A Review

Uday A. Dabade, , Amit Phatak and Nikhil Vaze
Conference Paper National Conference, (NACAME 2004), 23-25 September 2004

Abstract

Design and Development of Paper Washer Feeding Device Using Low Cost Automation (LCA)

Uday A. Dabade, , M.Y. Khire and B.S. Gawali
Conference Paper National Conference on Emerging Trends in Mechanical Engineering, February 05-06, 2004, KDKCE, Nagpur, Paper Number e-TIME/16/R-0-2

Abstract

Surface Integrity and Surface Finish of Machined Surface of Al/SiCp Composites

Uday A. Dabade, and Suhas S. Joshi
Conference Paper Proceeding of 4th National Conference on ‘Precision Engineering’ (COPEN 2005) held at Jadavpur University, Kolkata, INDIA on 19-20th December 2005

Abstract

Machining of Al/SiCp Metal Matrix Composites: A Review

Uday A. Dabade, and Suhas S.Joshi
Conference Paper Proceedings of National Seminar on Advances in Product Development (APD 2006) held at MNNIT Allahabad during 17 - 18th February 2006

Abstract

Automated Storage and Retrieval System (AS/RS): History and Opportunities

Uday A. Dabade, , P.A. Karkhanis, Nitin S. Banait and N. Ramakrishnan
Conference Paper Proceedings of National Seminar on Advances in Product Development (APD 2006)” held at MNNIT Allahabad during 17-18th February 2006

Abstract

E- Manufacturing: A Review

Uday A. Dabade, , Nitin Banait and Raju Pawade
Conference Paper Proceedings of National Conference on Automation in Manufacturing Technology (NCAMT-2006) held at Northern India Engineering College, New Delhi-110053, India, during January 27-28, 2006

Abstract

A Review of Wire EDM Process

Uday A. Dabade, , S. P. Nevagi and S. S. Kamat
Conference Paper Proceedings of National Conference on Recent Advances in Manufacturing (RAM - 2010) S.V. National Institute of Technology, Surat – 395007, India, during July, 19-21, 2010

Abstract

Preparation for 5S Implementation and Ergonomics Analysis for Assembly line of Gensets

Uday A. Dabade, and C. D. Dhaphale
Conference Paper Proceedings of National Conference on Recent Advances in Manufacturing (RAM - 2010) S.V. National Institute of Technology, Surat – 395007, India, during July, 19-21, 2010

Abstract

Effect of Process Parameters During Electrical Discharge Machining of Inconel-718

Uday A. Dabade, and V. L. Jagtap
Conference Paper Proceedings of National Conference on Recent Advances in Manufacturing (RAM - 2010) S.V. National Institute of Technology, Surat – 395007, India, during July, 19-21, 2010

Abstract

Application of Historical Data in Foundry for Casting Parameter Optimisation

Uday A. Dabade, and H.C. Pandit
Conference Paper Proceedings of 27th National Convention of Production Engineers and National Seminar on Advancements in Manufacturing – VISION 2020, organised by BIT, Mesra, Ranchi, India during 25th – 26th May 2012

Abstract

Analysis of Casting Defects by Design of Experiments Method

Uday A. Dabade, and Rahul Bhedasgaonkar
Conference Paper Proceedings of 27th National Convention of Production Engineers and National Seminar on Advancements in Manufacturing – VISION 2020, organised by BIT, Mesra, Ranchi, India during 25th – 26th May 2012

Abstract

Development of Test Rig for Frictional Torque Measurement of an Automobile Engine

Uday A. Dabade, and Prajakta Mujumdar
Conference Paper Proceedings of 27th National Convention of Production Engineers and National Seminar on Advancements in Manufacturing – VISION 2020, organised by BIT, Mesra, Ranchi, India during 25th – 26th May 2012

Abstract

Effect of vehicle speed on rolling resistance: fuel economy

Uday A. Dabade, and Arush Oswal
Conference Paper Proceedings of 1st National Conference on Recent Advancements in Engineering (NCRAE-2012), organised by Sanjeevan Engineering and Technology Institute, Panhala, 22-23 June, 2012

Abstract

Analysis of Surface Roughness in Face Milling with Self-Propelled Round Insert Milling Cutter

Uday A. Dabade, and S.V. Gaikwad
Conference Paper Proceedings of the Third National Conference on Recent Advances in Manufacturing (RAM - 2012) S.V. National Institute of Technology, Surat – 395007, India, during June, 27 -29, 2012

Abstract

Productivity Improvement through Cycle Time Reduction

Uday A. Dabade, and S.S. Jamadade
Conference Paper Proceedings of the Third National Conference on Recent Advances in Manufacturing (RAM - 2012) S.V. National Institute of Technology, Surat – 395007, India, during June, 27-29, 2012

Abstract

Effect of Vehicle Speed on Rolling Resistance

Uday A. Dabade, and Arush Oswal
Conference Paper Proceedings of the Third National Conference on Recent Advances in Manufacturing (RAM - 2012) S.V. National Institute of Technology, Surat – 395007, India, during June, 27- 29, 2012

Abstract

Cooling Techniques to Improve Surface Integrity of Inconel 718: A Review

Uday A. Dabade, and Sunil J. Raykar
Conference Paper Proceedings ofNational Conference on Emerging Trends in Engineering, Technology & Architecture 2013, Organised by D.Y. Patil College of Engineering, Kolhapur, 29th January 2013, pp 215-220

Abstract

Current Teaching

  • Present

    Operational Research

    Description of Subject 1

  • Present

    Manufacturing Planning and Control

    Description of Subject 2

  • Present

    Micro and Non-conventional Machining

    Description of Subject 3

  • Present

    Optimization and Quantitative techniques

    Description of Subject 4

  • Present

    Production Engineering Lab – I

    Description of Subject 5

Teaching History

  • Material Science and Metallurgy

    Description of Subject 1

  • Metrology and Quality Control

    Description of Subject 2

  • Basic Mechanical Engineering

    Description of Subject 3

  • Engineering Graphics

    Description of Subject 4

  • Machine Tools

    Description of Subject 5

  • Manufacturing Processes – I and II

    Description of Subject 6

  • Workshop Technology

    Description of Subject 7

  • Industrial Engineering

    Description of Subject 8

  • CAM

    Description of Subject 9

  • Advanced Manufacturing Technology – I

    Description of Subject 10

  • Quantitative Techniques

    Description of Subject 11

  • Advanced Manufacturing Technology – II

    Description of Subject 12

At My Office

You can find me at my office located at Mechanical Department. I am at my office every day from 9:00 until 18:00, but you may consider a call to fix an appointment.

At My Work

You can find me at my office located at Mechanical Department. I am at my office every day from 9:00 until 18:00, but you may consider a call to fix an appointment.

At My Lab

You can find me at my lab located at Mechanical Department. I am at my office every day from 9:00 until 18:00, but you may consider a call to fix an appointment.